CD60M - Parker Digiplan CD60M Stepper Motor Drive Simple Type: Stepper Motor
- Part Number:
- CD60M
- Model Number:
- CD60M
- Make:
- PARKER DIGIPLAN
- Lead Time:
- Available
- Qty In Stock:
- Available
Parker Digiplan CD60M Stepper Motor Drive Simple Type: Stepper Motor
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- Compact package-10HP (2") front panel
- Compatibility with previous CD drives
- High voltage operation up to 120V
- Mini-stepping built in
- Optimized current profiles
- Programmable motor current
- Programmable standby current reduction
- Single supply operation
Specifications
- Current programming: Down to 60% of maximum, or 30% with permanent standby
- Input levels direct Input impedance: Pull-up resistors (4K7) to +12V (built in)
- Input levels direct Input logic level: Low (logic 0) 0 to 2V or short circuit to OV, High (logic 1) +10V to +12V or open circuit
- Input via opto motherboard: TTL, low <0.8V, high >3.5V, max. input current 20mA
- Maximum step frequency: 200kHz at 4000 steps/rev
- Minimum step pulse width: 1µs
- Motherboard Fuse (FS1): 10A QA HBC 32mm x 6.3mm
- Motor Resolution: 400, 1000, 2000, 4000 steps/rev (User-selectable)
- Motor supply current max. at 120V: 4A (CD60M), 5.5A (CD80M)
- Motor supply voltage: +48 to +140VDC (+10%, -15%)
- Nominal output current (RMS)CD60M: 6A/phase
- Nominal output current (RMS)CD80M: 7.8A/phase
- Output levels direct: Open-collector NPN transistors; +30V max off, 15mA max on
- Over-temperature: If heatsink exceeds 85°C (185°F)
- Short-circuit: Across phases, between phases and from each phase to ground
- Standby Current Reduction: 50% or 80% of programmed current, jumper-selectable
- Supply fault: Cutout voltage limits UNDERVOLTAGE < 38V, OVERVOLTAGE > 170V
- Type: Bipolar recirculating switched-mode
Applications
- None Available
Aliases
- None Available
